Dealer Login
Login:
  Password:    
     
 
  Home » Microdolly » Dollies & Accessories
Product Lines
New Products (61)
What's New
K301P Pro Travel Kit (3x-P360 Pro) - FLXK301P
Fiilex
K301P Pro Travel Kit (3x-P360 Pro) - FLXK301P

Contact Us
Miller Canada

1055 Granville Street
Vancouver, BC
V6Z 1L4, Canada

Phone: 604-685-4654
Fax: 604-685-5648

Hours
Mon-Sat: 9am-5pm PST
Sunday: Closed
Holidays: Closed

Displaying 1 to 12 (of 15 products) Result Pages:  1  2  [Next >>] 
    Manufacturer   Product Name     
 
Camera Dolly & Track Kit
 
 Microdolly  Camera Dolly & Track Kit
The Camera Dolly & Track Kit includes one "T"-Bar Dolly, 13 Feet (4m) of camera dolly Track, two 13 foot Track Pads, one Dozen Track Shims, one Ratchet Tie-down, one Wheel Wrench Tool, one Track Bumper and one Custom Soft Case. Straps to backpack kit are included. No tools are required to assemble.
 
 
Camera High Hat
 
 Microdolly  Camera High Hat
Made of machined structural grade aluminum, this lightweight yet very sturdy Camera High Hat positions the camera just inches above the Dolly. Attaches in seconds. Will hold 75mm, 100mm and 150mm cups for mounting of ball leveled heads. Imbedded "O"-ring prevents slippage. Designed for loads under 25 pounds. Platform size: 4 x 6 inches (10 x 15cm).
 
 
Camera High Hat Board
 
 Microdolly  Camera High Hat Board
Poly sealed for weather protection, the Camera High Hat Board is made of 7 ply Finnish Birch and attaches to the Dolly with stainless steel bolts. It is pre-drilled to mount either the MICRODOLLY RISER or the Camera Plate from the MICRODOLLY SUCTION MOUNT KIT. Any standard High Hat can also be attached. Platform size: 9 x 9 x 13 inches.
 
 
Curved Track
 
 Microdolly  Curved Track
Of special note is the Curved Track from MICRODOLLY. Each 15 foot (4.5m) section turns 90 degrees on an 8 foot (2.5m) radius. Four sections make a full circle. This amazing track folds to a compact 30 inches (76cm)and will fit in the standard MICRODOLLY Soft Case. It works with the standard MICRODOLLY "T"-Bar Dolly and Straight Track.
 
 
Dolly Adapter Plate
 
 Microdolly  Dolly Adapter Plate
This handy Triangle Plate mounts to the Dolly in seconds so that you can attach the Camera Plates from either the MICRODOLLY Riser Kit or Suction Mount Kit as a hi-hat for low angle shots. It can also be used off of the Dolly as a leveling plate. Will support up to fifty pounds. Comes in its own pouch. Size is 7" X 7" X 7" and 1" Thick.
 Miller Special Order Item 
 
Dolly Platform
 
 Microdolly  Dolly Platform
Made of 7 ply Finnish Birch, the Platform attaches firmly to the Dolly in seconds. Sealed for weather protection, it is perfect for carrying weights, batteries or field recorders. Fits neatly inside a MICRODOLLY Kit Bag. Platform size: 9 x 24 inches (23 x 62cm).
 
 
Dolly Studio Wheels
 
 Microdolly  Dolly Studio Wheels
The Dolly Studio Wheels snap into position to allow the Dolly to be used off the Dolly Track on a smooth surface. The regular Dolly Track wheels need not be removed. The Studio Wheels swivel 360 degrees independently to allow the Dolly to move in any direction. Studio Wheels can be mounted or detached in just seconds.
 
 
Extra Track Kit
 
 Microdolly  Extra Track Kit
The Extra Track Kit is the complete track accessory for longer Dolly shots. The Kit includes two 13 foot (4m) Straight Track Sections, four 13 foot Foam Track Pads, 24 Shims, two Track Connector Kits, and one Custom Made Soft Case. All Tracks and foam pads fold to a compact 30 in. (76cm) in length. Curved Track may be substituted as an upgrade.
 Miller Special Order Item 
 
Flex Case
 
 Microdolly  Flex Case
The Flex Case is manufactured from heavy-duty plastic. The edges and corners are reinforced with anodized metal. Interior is fully foam lined. These rugged Cases will carry a single MICRODOLLY Kit Bag or can expand to accommodate two Kit Bags or accessories. Sealed ball bearing wheels make for easy transport.
 Miller Special Order Item 
 
Ladder Dolly Kit
 
 Microdolly  Ladder Dolly Kit
The Ladder Dolly Kit allows the Camera Dolly & Track Kit to be mounted to a standard extension ladder. It comes with a clamp set to attach track to the ladder, and a telescoping Camera Dolly T-Bar to adapt the Dolly to any ladder width. Four adjustable feet for surface mounting and two Tripod Adapter Plates to mount the ladder to a tripod are included. The Kit is made of military spec, hard-anodized aluminum/titanium and stainless steel. A ballistic nylon Soft Case is included.
 Miller Special Order Item 
 
Non Skid Track Pads
 
 Microdolly  Non Skid Track Pads
As the name suggests, these super light weight Non Skid Track Pads protect the surface and will not allow the Dolly Track to skid or move even when wet. Made from a fiberglass mesh dipped in neoprene and coated with a patented sticky material these Pads are temperature and water resistant. Each pair of Pads is 15 feet long and may be used with Straight or Curved Dolly Track.
 
 
Push Bar
 
 Microdolly  Push Bar
This handy accessory attaches to the T-Bar Camera Dolly and allows the Dolly to be pushed by someone other than the camera operator. Crafted from sturdy, structural grade aluminum, with a carbon steel universal joint, the Push Bar is 50 in. (128cm) in length and closes to fit snugly into the Basic Kit Bag.
 
Displaying 1 to 12 (of 15 products) Result Pages:  1  2  [Next >>] 
Manufacturers
Featured
Height adjustable bars adapter - #0360-0100
Vocas
Height adjustable bars adapter - #0360-0100


Copyright © 2017 Miller Canada