| |
Manufacturer |
Product Name |
|
| |
Microdolly |
Camera Dolly & Track Kit
The Camera Dolly & Track Kit includes one "T"-Bar Dolly, 13 Feet (4m) of camera dolly Track, two 13 foot Track Pads, one Dozen Track Shims, one Ratchet Tie-down, one Wheel Wrench Tool, one Track Bumper and one Custom Soft Case. Straps to backpack kit are included. No tools are required to assemble. |
|
| |
Microdolly |
Camera High Hat
Made of machined structural grade aluminum, this lightweight yet very sturdy Camera High Hat positions the camera just inches above the Dolly. Attaches in seconds. Will hold 75mm, 100mm and 150mm cups for mounting of ball leveled heads. Imbedded "O"-ring prevents slippage. Designed for loads under 25 pounds. Platform size: 4 x 6 inches (10 x 15cm). |
|
| |
Microdolly |
Camera High Hat Board
Poly sealed for weather protection, the Camera High Hat Board is made of 7 ply Finnish Birch and attaches to the Dolly with stainless steel bolts. It is pre-drilled to mount either the MICRODOLLY RISER or the Camera Plate from the MICRODOLLY SUCTION MOUNT KIT. Any standard High Hat can also be attached. Platform size: 9 x 9 x 13 inches. |
|
| |
Microdolly |
Curved Track
Of special note is the Curved Track from MICRODOLLY. Each 15 foot (4.5m) section turns 90 degrees on an 8 foot (2.5m) radius. Four sections make a full circle. This amazing track folds to a compact 30 inches (76cm)and will fit in the standard MICRODOLLY Soft Case. It works with the standard MICRODOLLY "T"-Bar Dolly and Straight Track. |
|
| |
Microdolly |
Dolly Adapter Plate
This handy Triangle Plate mounts to the Dolly in seconds so that you can attach the Camera Plates from either the MICRODOLLY Riser Kit or Suction Mount Kit as a hi-hat for low angle shots. It can also be used off of the Dolly as a leveling plate. Will support up to fifty pounds. Comes in its own pouch. Size is 7" X 7" X 7" and 1" Thick. |
 |
| |
Microdolly |
Dolly Platform
Made of 7 ply Finnish Birch, the Platform attaches firmly to the Dolly in seconds. Sealed for weather protection, it is perfect for carrying weights, batteries or field recorders. Fits neatly inside a MICRODOLLY Kit Bag. Platform size: 9 x 24 inches (23 x 62cm). |
|
| |
Microdolly |
Extra Track Kit
The Extra Track Kit is the complete track accessory for longer Dolly shots. The Kit includes two 13 foot (4m) Straight Track Sections, four 13 foot Foam Track Pads, 24 Shims, two Track Connector Kits, and one Custom Made Soft Case. All Tracks and foam pads fold to a compact 30 in. (76cm) in length. Curved Track may be substituted as an upgrade. |
|
| |
Microdolly |
Non Skid Track Pads
As the name suggests, these super light weight Non Skid Track Pads protect the surface and will not allow the Dolly Track to skid or move even when wet. Made from a fiberglass mesh dipped in neoprene and coated with a patented sticky material these Pads are temperature and water resistant. Each pair of Pads is 15 feet long and may be used with Straight or Curved Dolly Track. |
|
| |
Microdolly |
Push Bar
This handy accessory attaches to the T-Bar Camera Dolly and allows the Dolly to be pushed by someone other than the camera operator. Crafted from sturdy, structural grade aluminum, with a carbon steel universal joint, the Push Bar is 50 in. (128cm) in length and closes to fit snugly into the Basic Kit Bag. |
|
| |
Microdolly |
Straight Track
Additional Straight Track Sections are 13 feet (4m) in length and fold to 30 in. (76cm). Extra Sections come with a Tube Bag for protection and a Track Connector Kit which joins track sections together. |
|
| |
Microdolly |
Tripod Tiedown Kit
Machined from durable high impact nylon, this set of three connectors snaps into place to quickly attach a tripod to the Dolly. This allows the tripod to be easily adjusted while still mounted on the Dolly. The Tripod Tiedown Kit will fit most professional tripods. |
|
Anton Bauer (77) 
