| |
Manufacturer |
Product Name |
|
| |
Microdolly |
90 Degree Plate Camera Mount
Manufactured from structural grade aluminum and hard anodized for heavy-duty use, the 90 Degree Plate Camera Mount will allow the camera to be mounted vertically from the Jib Camera Plate or the Suction Mount Camera Plate. A 100mm Cup will attach to mount pan/tilt leveling ball. Camera plate knob is included. Face Plate Size: 4"x4". |
 |
| |
Microdolly |
Basic Jib Kit
The Basic Jib Kit includes the MICRODOLLY Jib and the standard 34 inch MICRODOLLY Soft Case. An adapter plate to attach the Jib to almost any professional tripod and a heavy-duty camera plate knob to mount the camera are also part of the Kit. Spring-loaded clips are included to keep gym weights safely on the weight bar. To increase reach, the Jib boom can telescope from 33 inches to 52 inches. The Jib weighs just over 9 pounds and will carry a maximum video or film camera load of 50 pounds at the 33 inch length. |
|
| |
Microdolly |
Camera Plate Kit
The Camera Plate Kit includes the Swing Plate, 90 Degree Plate, Undersling, and 100mm Cup. The rugged metal-reinforced hard case includes heavy interior foam padding, pre-cut to accommodate the MICRODOLLY Jib's most popular Camera Plate Accessories. Two metal latches key-lock for added security. Please look below for details and specifications of each accessory. |
|
| |
Microdolly |
Jib Boom Extension
This light weight yet heavy duty extension adds a full 30 inches (76 cm) to the length of your MICRODOLLY Jib. Made of the same high quality materials as the Jib, it gives you additional reach without sacrificing weight capacities. The Boom Extension packs neatly into its own carrying bag. Up to three Boom Extensions may be used to extend the Jib to 12 feet (3.7m). A Jib Boom Truss is necessary when adding Extensions. |
|
| |
Microdolly |
Jib Boom Truss
The Jib Truss mounts on the Jib Boom with or without the Boom Extension in place. Manufactured from nylon coated stainless steel cable, the truss is designed to assure rigidity when carrying maximum weight. Installs in less than one minute without tools. A longer cable truss is necessary if more than one extension is to be used. Please specify the number of Extensions being used when ordering Jib Truss Kits. |
|
| |
Microdolly |
Jib Dolly
The Jib Dolly is designed to support any size MICRODOLLY Jib. Manufactured from structural grade aluminum and hard anodized for weather protection, it has nine large heavy-duty ball bearing wheels that provide an extra large foot print for added stability. A telescoping steering and pull handle make it easy to move even when fully loaded. For safety, all wheel casters have quick-release brakes. The Jib Dolly folds for easy transport and comes with a heavily padded softcase. |
|
| |
Microdolly |
Jib Setup Bracket
The Jib Setup Bracket is a handy accessory that allows you to rest the MICRODOLLY Jib on a standard C-stand or light stand. The Setup Bracket will support the Jib while attaching the camera or Power Head. It travels in the Jib Soft Case and is made of sturdy anodized aluminum. |
|
| |
Microdolly |
Jib Upgrade Kit
The Jib Upgrade Kit includes the most popular MICRODOLLY Jib accessory items. The Kit contains the Weight Cage, a nylon cage liner bag and a folding water bottle, a 30-inch Boom Extension, the stainless steel Boom Truss, and the Multi Joint Monitor Mount. A MICRODOLLY Soft Case bag provides convenient storage and handling. Please look below for details and specifications of each accessory. |
|
| |
Microdolly |
Jib Weight Cage
The Jib Weight Cage allows you to travel to location without carrying gym weights. It comes with a nylon cage liner bag and a folding water bottle. Together, these allow you to use absolutely anything for counterweight; rocks, sand, even water! The Weight Cage folds flat and packs neatly into its own carrying bag. |
|
| |
Microdolly |
Multi Joint Monitor Kit
The Multi Joint Monitor Mount is a totally unique addition to the MICRODOLLY Jib System. This arm has a quad-axis swivel and mounts in any of six positions on the Jib yoke, allowing you to see your monitor at absolutely any angle. The Multi Joint Monitor Mount is included in the MICRODOLLY Jib Accessory Kit or may be purchased separately. |
|
| |
Microdolly |
Swing Plate Camera Mount
Designed to extend the Jib camera plate, the Swing Plate Camera Mount can also be rotated 360 degrees to offset the camera at any angle. Machined from structural grade aluminum and hard anodized for weather protection, the Swing Plate is useful to mount a studio matte box or teleprompter. 100mm Cup accessory can also be attached. Plate is 4"x9". |
|
| |
Microdolly |
Undersling Camera Mount
This clever accessory will allow the camera to be mounted 14 inches below the Jib Boom for shots that require a low angle view. A fluid head may also be mounted between the camera plate and the Undersling so that total pan/tilt control can be maintained. The Undersling can be rotated 360 degrees to face any direction. |
|
Anton Bauer (76) 
