Dealer Login
Login:
  Password:    
     
 
  Home » Microdolly » Mounts & Accessories
Product Lines
New Products (23)
What's New
K305P Pro Kit (3x-P360 Pro, 5 inch Fresnel Lens)
Fiilex
K305P Pro Kit (3x-P360 Pro, 5 inch Fresnel Lens)

Contact Us
Miller Canada

1055 Granville Street
Vancouver, BC
V6Z 1L4, Canada

Phone: 604-685-4654
Fax: 604-685-5648

Hours
Mon-Sat: 9am-5pm PST
Sunday: Closed
Holidays: Closed

Displaying 1 to 12 (of 15 products) Result Pages:  1  2  [Next >>] 
    Manufacturer   Product Name     
 
90 Degree Plate Camera Mount
 
 Microdolly  90 Degree Plate Camera Mount
Manufactured from structural grade aluminum and hard anodized for heavy-duty use, the 90 Degree Plate Camera Mount will allow the camera to be mounted vertically from the Jib Camera Plate or the Suction Mount Camera Plate. A 100mm Cup will attach to mount pan/tilt leveling ball. Camera plate knob is included. Face Plate Size: 4"x4".
 Miller Special Order Item 
 
Camera High Hat
 
 Microdolly  Camera High Hat
Made of machined structural grade aluminum, this lightweight yet very sturdy Camera High Hat positions the camera just inches above the Dolly. Attaches in seconds. Will hold 75mm, 100mm and 150mm cups for mounting of ball leveled heads. Imbedded "O"-ring prevents slippage. Designed for loads under 25 pounds. Platform size: 4 x 6 inches (10 x 15cm).
 
 
Camera High Hat Board
 
 Microdolly  Camera High Hat Board
Poly sealed for weather protection, the Camera High Hat Board is made of 7 ply Finnish Birch and attaches to the Dolly with stainless steel bolts. It is pre-drilled to mount either the MICRODOLLY RISER or the Camera Plate from the MICRODOLLY SUCTION MOUNT KIT. Any standard High Hat can also be attached. Platform size: 9 x 9 x 13 inches.
 
 
Camera Mount Extension Rod Kit
 
 Microdolly  Camera Mount Extension Rod Kit
The Camera Mount Extension Rod Kit contains two 30 inch and two 24 inch rods which can extend the distance of the Suction Mount cups or Mounting Clamps from the Camera Plate. Made of sturdy structural-grade aircraft aluminum the rods are military-spec hard-anodized for long wear. A handy carrying pouch is included.
 Miller Special Order Item 
 
Camera Plate Kit
 
 Microdolly  Camera Plate Kit
The Camera Plate Kit includes the Swing Plate, 90 Degree Plate, Undersling, and 100mm Cup. The rugged metal-reinforced hard case includes heavy interior foam padding, pre-cut to accommodate the MICRODOLLY Jib's most popular Camera Plate Accessories. Two metal latches key-lock for added security. Please look below for details and specifications of each accessory.
 Miller Special Order Item 
 
Cup Adapter Kit
 
 Microdolly  Cup Adapter Kit
The Cup Adapter Kit will allow a wide range of Pan/Tilt heads to be mounted to the MICRODOLLY Pro Line of Jibs, Dollies and Mounts. The Kit comes with a 100mm Cup and includes a 75mm and 150mm Cup Insert. It will attach easily to the Hi-Hat, Jib, Standard Tripod or Baby Tripod. It will also attach to any MICRODOLLY Camera Plate Accessory. Made of sturdy structural-grade aircraft aluminum all parts are military-spec hard-anodized for long wear.
 Miller Special Order Item 
 
Dolly Adapter Plate
 
 Microdolly  Dolly Adapter Plate
This handy Triangle Plate mounts to the Dolly in seconds so that you can attach the Camera Plates from either the MICRODOLLY Riser Kit or Suction Mount Kit as a hi-hat for low angle shots. It can also be used off of the Dolly as a leveling plate. Will support up to fifty pounds. Comes in its own pouch. Size is 7" X 7" X 7" and 1" Thick.
 Miller Special Order Item 
 
Dolly Platform
 
 Microdolly  Dolly Platform
Made of 7 ply Finnish Birch, the Platform attaches firmly to the Dolly in seconds. Sealed for weather protection, it is perfect for carrying weights, batteries or field recorders. Fits neatly inside a MICRODOLLY Kit Bag. Platform size: 9 x 24 inches (23 x 62cm).
 
 
Mounting Clamps
 
 Microdolly  Mounting Clamps
The Mounting Clamps has three of our modified Cardellini-style Clamps that work directly with the Suction Mount Kit. The Clamps allow the Camera Plate to be mounted to bars, poles and any square or rounded flat edge surface from 3/8" to 2" thick. Ideal for mounting cameras on bicycles, motorcycles, roof racks, etc. A carrying pouch is included. Each Clamp is 5 3/4" long (14.6cm)
 Miller Special Order Item 
 
Multi Joint Monitor Kit
 
 Microdolly  Multi Joint Monitor Kit
The Multi Joint Monitor Mount is a totally unique addition to the MICRODOLLY Jib System. This arm has a quad-axis swivel and mounts in any of six positions on the Jib yoke, allowing you to see your monitor at absolutely any angle. The Multi Joint Monitor Mount is included in the MICRODOLLY Jib Accessory Kit or may be purchased separately.
 Miller Special Order Item 
 
Non Skid Track Pads
 
 Microdolly  Non Skid Track Pads
As the name suggests, these super light weight Non Skid Track Pads protect the surface and will not allow the Dolly Track to skid or move even when wet. Made from a fiberglass mesh dipped in neoprene and coated with a patented sticky material these Pads are temperature and water resistant. Each pair of Pads is 15 feet long and may be used with Straight or Curved Dolly Track.
 
 
Riser Kit
 
 Microdolly  Riser Kit
Designed to assemble in seconds, the Riser Kit allows you to raise the Jib or camera those extra few inches necessary to accomplish a shot. Kit includes three six inch and three 12 inch legs, two end plates, six mounting screws and a 5" stainless steel threaded rod. A patented MICRODOLLY Speed Nut is also included, along with a screwdriver for quick assembly. A carrying pouch is included.
 Miller Special Order Item 
Displaying 1 to 12 (of 15 products) Result Pages:  1  2  [Next >>] 
Manufacturers
Featured
4X4 5-FLTR KIT W/HLDR - 70-C48802
Century Precision
4X4 5-FLTR KIT W/HLDR - 70-C48802


Copyright © 2018 Miller Canada