Dealer Login
Login:
  Password:    
     
 
  Home » Microdolly » Mounts & Accessories
Product Lines
New Products (56)
What's New
K201P Pro Travel Kit (2x-P360 Pro) - FLXK201P
Fiilex
K201P Pro Travel Kit (2x-P360 Pro) - FLXK201P

Contact Us
Miller Canada

1055 Granville Street
Vancouver, BC
V6Z 1L4, Canada

Phone: 604-685-4654
Fax: 604-685-5648

Hours
Mon-Sat: 9am-5pm PST
Sunday: Closed
Holidays: Closed

Displaying 1 to 12 (of 21 products) Result Pages:  1  2  [Next >>] 
    Manufacturer   Product Name+     
 
90 Degree Plate Camera Mount
 
 Microdolly  90 Degree Plate Camera Mount
Manufactured from structural grade aluminum and hard anodized for heavy-duty use, the 90 Degree Plate Camera Mount will allow the camera to be mounted vertically from the Jib Camera Plate or the Suction Mount Camera Plate. A 100mm Cup will attach to mount pan/tilt leveling ball. Camera plate knob is included. Face Plate Size: 4"x4".
 Miller Special Order Item 
 
Bongo Ties
 
 Microdolly  Bongo Ties
These clever tie wraps make it super simple to manage electrical, video, and audio cables. Made from heavy duty rubber bands and attached to a patented flared-end "Bongo" pin, they provide a superior button style closure. "Bongo Ties" are sold in packages of ten.
 
 
Briefcase
 
 Microdolly  Briefcase
This custom made Briefcase is the perfect carry-all to protect your computer, script and light meter when you travel. It is fully padded and has built-in compartments for file folders, pencils and cell phone. For safety, it is metal reinforced just like standard equipment Cases and can be locked to ship as baggage when necessary.
 Miller Special Order Item 
 
Camera High Hat
 
 Microdolly  Camera High Hat
Made of machined structural grade aluminum, this lightweight yet very sturdy Camera High Hat positions the camera just inches above the Dolly. Attaches in seconds. Will hold 75mm, 100mm and 150mm cups for mounting of ball leveled heads. Imbedded "O"-ring prevents slippage. Designed for loads under 25 pounds. Platform size: 4 x 6 inches (10 x 15cm).
 
 
Camera High Hat Board
 
 Microdolly  Camera High Hat Board
Poly sealed for weather protection, the Camera High Hat Board is made of 7 ply Finnish Birch and attaches to the Dolly with stainless steel bolts. It is pre-drilled to mount either the MICRODOLLY RISER or the Camera Plate from the MICRODOLLY SUCTION MOUNT KIT. Any standard High Hat can also be attached. Platform size: 9 x 9 x 13 inches.
 
 
Camera Mount Extension Rod Kit
 
 Microdolly  Camera Mount Extension Rod Kit
The Camera Mount Extension Rod Kit contains two 30 inch and two 24 inch rods which can extend the distance of the Suction Mount cups or Mounting Clamps from the Camera Plate. Made of sturdy structural-grade aircraft aluminum the rods are military-spec hard-anodized for long wear. A handy carrying pouch is included.
 Miller Special Order Item 
 
Camera Plate Kit
 
 Microdolly  Camera Plate Kit
The Camera Plate Kit includes the Swing Plate, 90 Degree Plate, Undersling, and 100mm Cup. The rugged metal-reinforced hard case includes heavy interior foam padding, pre-cut to accommodate the MICRODOLLY Jib's most popular Camera Plate Accessories. Two metal latches key-lock for added security. Please look below for details and specifications of each accessory.
 Miller Special Order Item 
 
Cup Adapter Kit
 
 Microdolly  Cup Adapter Kit
The Cup Adapter Kit will allow a wide range of Pan/Tilt heads to be mounted to the MICRODOLLY Pro Line of Jibs, Dollies and Mounts. The Kit comes with a 100mm Cup and includes a 75mm and 150mm Cup Insert. It will attach easily to the Hi-Hat, Jib, Standard Tripod or Baby Tripod. It will also attach to any MICRODOLLY Camera Plate Accessory. Made of sturdy structural-grade aircraft aluminum all parts are military-spec hard-anodized for long wear.
 Miller Special Order Item 
 
Dolly Adapter Plate
 
 Microdolly  Dolly Adapter Plate
This handy Triangle Plate mounts to the Dolly in seconds so that you can attach the Camera Plates from either the MICRODOLLY Riser Kit or Suction Mount Kit as a hi-hat for low angle shots. It can also be used off of the Dolly as a leveling plate. Will support up to fifty pounds. Comes in its own pouch. Size is 7" X 7" X 7" and 1" Thick.
 Miller Special Order Item 
 
Dolly Platform
 
 Microdolly  Dolly Platform
Made of 7 ply Finnish Birch, the Platform attaches firmly to the Dolly in seconds. Sealed for weather protection, it is perfect for carrying weights, batteries or field recorders. Fits neatly inside a MICRODOLLY Kit Bag. Platform size: 9 x 24 inches (23 x 62cm).
 
 
Dolly Studio Wheels
 
 Microdolly  Dolly Studio Wheels
The Dolly Studio Wheels snap into position to allow the Dolly to be used off the Dolly Track on a smooth surface. The regular Dolly Track wheels need not be removed. The Studio Wheels swivel 360 degrees independently to allow the Dolly to move in any direction. Studio Wheels can be mounted or detached in just seconds.
 
 
Flex Case
 
 Microdolly  Flex Case
The Flex Case is manufactured from heavy-duty plastic. The edges and corners are reinforced with anodized metal. Interior is fully foam lined. These rugged Cases will carry a single MICRODOLLY Kit Bag or can expand to accommodate two Kit Bags or accessories. Sealed ball bearing wheels make for easy transport.
 Miller Special Order Item 
Displaying 1 to 12 (of 21 products) Result Pages:  1  2  [Next >>] 
Manufacturers
Featured
4X4 5-FLTR KIT W/HLDR - 70-C48802
Century Precision
4X4 5-FLTR KIT W/HLDR - 70-C48802


Copyright © 2017 Miller Canada