D-Tap Cable FLXA011 - Type A1 The D-Tap Cable (also known as P-Tap) is designed for an alternative way to power the P360/P200/P180E. A 2.5mm DC Connector plugs into the light, the opposite end features an industry standard D-Tap Connection that plugs into professional DC Broadcast Batteries. This is a coiled cable that extends to 2 ft long and allows for direct connection to a DC battery without having excess slack on set.
D-Tap Cable FLXA012 - Type A2 The D-Tap Cable (aka P-Tap) is designed for an alternative way to power the P360/P200/P180E. A 2.5mm DC Connector plugs into the light, the opposite end features an industry standard D-Tap Connection to plug into professional DC Broadcast Batteries. This is a straight cable slightly over 8 ft long and allows for remote placement of the battery to create freedom between the power source and the light head.
DMX Connection Box Allows for complete DMX Control of the P360EX. Features LCD display with 512 addresses. Can be mounted to a light stand or tripod with the Included Power Adapter Holder.
Dome Diffuser The Dome Diffuser is designed to attach to the magnetic mounts on the front of the P360. The Dome Diffuser increases the beam angle and also softens the light.
The Extra Small Softbox Kit turns the point-source P360 and P360EX into beautiful and compact fill lights. The softbox attaches via four flex rods to the included Speed Ring and can be collapsed for easy transport in the travel bag. The degree of diffusion can be fine-tuned with inner and outer baffles, and the optional Grid accessory further enhances the light-shaping abilities of the softbox.
Fresnel Lens The Fresnel Lens is designed to attach to the magnetic mounts on the front of the P360. The Fresnel Lens allows you to focus/spot the beam of light to about 29° and intensifies the light by roughly 3x.
Magnetic Gel Holder w/Extension FLXA008 The Magnetic Gel Holder is designed to attach to the magnetic mounts on the front of the P360/P200/P180E. The Magnetic Gel Holder is a two part system that allows you to magnetically clamp a gel to the face of the light head. Allows for use of special effect gels to create colors or effects that are outside the CCT range of the Fiilex System.
Medium Softbox kit w/ ‘P’ Connector (A048) The Medium Softbox Kit (P-Series) turns the point-source P360 and P360EX into versatile and broad fill lights. The softbox attaches via four flex rods to the included Speed Ring and can be collapsed for easy transport in the travel bag. The degree of diffusion can be fine-tuned with inner and outer baffles, and the optional Grid accessory further enhances the light-shaping abilities of the softbox.
The P100 Accessory Mount is designed to adapt the P100 to accept the Fiilex Dome Diffuser and Gel Holder accessories. It fits tightly around the outside of the P100 Lens and is held in place by tension. There are two magnetic mounts on the front face of the P100 Accessory Mount to attach the accessories. The P100 Accessory Mount is not meant for use with the Fresnel Lens as it already has a focusing lens on the light unit.
P2Q Converter Kit The P2Q Converter for the P360 & P360EX lets you focus the intensity of the light by 6X and greatly increases the throw distance. The converter has a 5” Fresnel that produces a Spot Beam Angle of 14º, and features large barndoors
This 7' Reverse Leg Light Stand from Fiilex uses a unique design that allows its legs to fold up against the riser enabling a closed length of 21" that neatly fits in the Fiilex Rolling Travel Case or similar cases. The 4-section stand is topped with a 5/8" stud with a 1/4"-20 male thread.
Anton Bauer (77) 
