Dealer Login
Login:
  Password:    
     
 
  Home
Product Lines
New Products (61)
What's New
Gravity G1 Handheld Gimbal System (New) (Coming Soon)
Tilta
Gravity G1 Handheld Gimbal System (New) (Coming Soon)

Contact Us
Miller Canada

1055 Granville Street
Vancouver, BC
V6Z 1L4, Canada

Phone: 604-685-4654
Fax: 604-685-5648

Hours
Mon-Sat: 9am-5pm PST
Sunday: Closed
Holidays: Closed

How To Setup Your Sprinter Tripod.

    

How to set up a Sprinter tripod

CORRECT WAY
1. Release transport clips.
2. Place tripod on ground, lift pan handle and release all levers. 
3. Lift tripod to desired operating height and close all levers.
4. Spread tripod legs using two hands. (Leg length can be altered by releasing lower lever.)    
5. Fine tune height and tripod foot print with adjusting knob on spreader hub.    
6. Close tripod using two hands and ensure length of all spreader arms is the same.

WRONG WAY
1. No need to bend over.
2. Do not hold tripod in the air and allow legs to free fall.    
3. Slide hammer effect can damage tripod.    
4. Do not spread legs by using feet. This can damage tripod.    
5. Do not put force on the spreader.    
6. Do not attempt to close tripod if spreader arms are at different lengths.

1. Release transport clips.
2. Place tripod on ground, lift pan handle and release all levers.

3. Lift tripod to desired operating height and close all levers
4. Spread tripod legs using two hands. (Leg length can be altered by releasing lower lever.)
5. Fine tune height and tripod foot print with adjusting knob on spreader hub.
6. Close tripod using two hands and ensure length of all spreader arms is the same.

1. No need to bend over.
2. Do not hold tripod in the air and allow legs to free fall.
3. Slide hammer effect can damage tripod.
4. Do not spread legs by using feet. This can damage tripod.
5. Do not put force on the spreader.
6. Do not attempt to close tripod if spreader arms are at different lengths.





Manufacturers
Featured
French flag for MB-210, including hinge - #0250-0050
Vocas
French flag for MB-210, including hinge - #0250-0050


Copyright © 2017 Miller Canada